Back to Blog
How-to Guides 2026-11-01 Plus-Plus USA | Plus-Plus Blocks - Empowering Open Ended 10 views

Run Small Group Centers with the Pick 25 Teachers Choice Set

Run Small Group Centers with the Pick 25 Teachers Choice Set

Turn the Pick 25 Teachers Choice set into a repeatable small group building center. Follow a simple rotation plan that keeps 25 tubes organized, fair, and easy to reset.

Quick answer

Set up the Pick 25 Teachers Choice set as a four-station rotation: one tube per group, a shared build mat, and a two-minute reset between groups. Keep the 25 tubes in the same labeled bin so each group starts with the same materials.

Why 25 tubes work for small groups, but need a plan

The Pick 25 Teachers Choice set gives you 25 of the 70-piece tubes to open and create with. That is enough variety for a center, but only if you decide in advance how many tubes each group gets. Without a plan, one group can take most of the tubes and the next group starts with leftovers.

Treat the 25 tubes as a shared classroom resource, not a free-play bin. Assign a fixed number per group and store the rest out of reach. This keeps the center fair and makes cleanup predictable.

Match the center to your schedule and space

A small group center works best when it has a clear start and stop signal. If your class rotates every 15 minutes, choose one build prompt per rotation rather than a long project. If you have a dedicated 30-minute block, allow one build and one share-out.

Space matters too. A shared build mat in the middle of the table gives each group a defined work area and keeps loose pieces from rolling onto the floor.

Small group center setup steps

  1. Choose and label the 25 tubes: Before students arrive, pick the 25 tubes you want in the center and mark each tube with a small colored dot or number. Store them in one labeled bin. If you skip labeling, tubes will drift between groups and your counts will stop matching.
  2. Divide tubes into group kits: Split the 25 tubes into four or five equal group kits. For four groups, give each group six tubes and keep one tube as a spare. For five groups, give each group five tubes. Write the group number on each kit bag so students can return tubes to the right kit.
  3. Set one build prompt per rotation: Place a single prompt card at the center, such as build a bridge that holds a pencil or build an animal with four legs. Keep the prompt visible for the whole rotation. A prompt that takes longer than the rotation will cause groups to leave unfinished builds and lose pieces.
  4. Run the rotation with a start and stop signal: Use a timer and a consistent signal. At the start, each group takes its kit and builds on the shared mat. At the stop signal, groups stop building and place loose pieces back in their kit. Do not let groups start a new build in the last two minutes; use that time for cleanup.
  5. Reset between groups: Before the next group arrives, check that each kit has its full tube count and that the mat is clear. Return any stray pieces to the correct kit. A quick count at reset catches missing tubes before they disappear under desks.
  6. Close the center with a full inventory: At the end of the center block, count the 25 tubes back into the main bin and store the bin in the same place. Note any missing tubes on a sticky note for the next day. If your count is short, check the floor and the shared mat before assuming a tube is lost.

Product facts

  • Pick 25 - Teachers Choice: The set includes 25 of the 70-piece tubes, chosen from the available tube options. Knowing the tube count helps you divide materials evenly across four or five small groups before the first rotation.
    Pick 25 - Teachers Choice
    Pick 25 - Teachers Choice

Related Articles

Customer Service
Home
Products
Cart
Profile